Royal Master Model TG-12X4 Precis-O-Matic Centerless Grinder

Description

Royal Master Model TG-12X4 Precis-O-Matic Centerless Grinder,
Servo Regulating Wheel. Auto Cycling Infeed. 2000
SPECIFICATIONS
LABEL
UNIT
Grinding Capacity Thrufeed
0.004" - 1.5" Dia
Grinding Wheel Maximum
12” Dia x 4” Wide
Grinding Wheel Minimum
10” Dia x 0.25” Wide
Regulating Wheel Maximum
6” Dia x 4” Wide
Regulating Wheel Minimum
4” Dia x 0.125” Wide
Regulating Head Max. Angle of Tilt for Thrufeed Grinding
6° Left – 6° Right
Wheel Head Max. Swivel for Taper Grinding
5° Left – 5° Right
Spindle Speeds for Grinding Wheel (constant)
2040 RPM
Spindle Speeds for Regulating Wheel (variable)
20 - 500 RPM
Approximate Weight
2500 pounds
7.5 HP, 3 Phase, 60 Cycle, 230 Volt Drive Motor. ¼ HP, 3 Phase, 60 Cycle, 230 Volt Hydraulic Pump in Base. With Controls.
Servo Driven Variable Speed Regulating Wheel with Automation. Direct PLC with Touchscreen Controls for Preselecting Wheel Speed for Grinding and Dressing Cycles. Hydraulic Profile Dressers for the Regulating Wheels. Air Sensing Dresser for The Grinding Wheel Which Allows for More Accurate Template Reproductions. 6-Phase Air Operated Automatic Cycling Infeed Unit with the Optional Microsize Adjustment for Greater Tolerance Control. Precision Regulating Wheel Housing. Taper Adjustment with Dial Indicator. Lubrication System. Work Blades. Work Support.
The Royal Master is a real good runner. Click link below to see a video of the regulating wheel changed from a pre programmed dressing speed to a pre programmed grinding speed.  You will see the dresser actuated and you will see the infeed. Repeating with extreme accuracy.   Please note the machine was used with a CBN wheel and does not have a dresser for the grinding wheel.   It was on a shared coolant system and does not have a tank with it.
Cleaned, Cycled, Guaranteed.
We will load on flat bed truck at no additional charge.  No vans.  No containers.
CLICK HERE FOR VIDEO
>