Mini Pneumatic Chamfering Machine Air Chamfer Beveling Trimming Deburring Tool

Description

2-In-1 Mini Chamfering Machine
Power Source: Air Powered
Special Features: ‎Variable-speed, Compact, Lightweight
Included Components: ‎Comes as a Combo Set
【Including】Chamfer tool, Bearing×1, ARC insert blade×2, Wrench×2, Air plug, Adequate accessories for greater convenience. Use the matching wrench to easily adjust the chamfer size and replace the blade.
【Easy Operation】This 45-degree mini chamfering machine air tools has a new lightweight design, small and exquisite, smooth cut, high efficiency, Low vibration, very smooth cutting of carbon steel. Can be easily operated with one hand, and feels more comfortable.
【Spesification】Weight 0.88lbs, Free Speed 30000 RPM, Air consumption 0.4/min, Air inlet port: 1/4 inch PT. Trimming Capacity: Chamfering: C0.1-C1.5, ARC cornor:R0.1-R1.5, Adjustable depth:0.1mm-0.9mm.
【Chamfer and ARC Cornor】Rounding and bevelling is possible by changing the inserts (2 type inserts included). Suitable for various angles, such as straight edge chamfering, inner and outer round hole chamfering, and irregular chamfering for metal trimming and round R side.
【Adjustable Speed and Angle】The portable air grinder deburring trimming chamfering tool 1-5 block valve adjustment thickened knob, freely adjust the gear speed you need. The chamfer size can be adjusted at will. The safety switch is used to prevent accidental touch to protect the user's safety at all times.
2 In 1 Mini Chamfering Machine Usage and Maintenance Tips
1. Before using the new machine, please inject pneumatic tool oil and inject about 4C.C into the air inlet. After continuous use for about 3 hours, about 4C.C is also injected into the air inlet.
2. After injecting pneumatic tool oil, let the machine idling for about ten seconds (do not operate), and let the internal parts of the grinder be lubricated as a whole before proceeding.
3. The maximum processing C Angle of this chamfering machine is C0.1-2 (The best effect is C1, C1 to C2 is best to be chamfered in two times, so the effect is better.)
4. Angle R is the arc Angle of R1.5.
5. Adjusting the scale wheel can adjust the size of the bevel of the cut, but not the angle.
6. The chamfer size can be adjusted at will: Loosen the 2 screws of the black gear plate with a thinner Allen key, twist the black gear plate left and right, adjust the chamfer size, and fix the 2 screws back to the original position.