-40%
LOCK BARS FOR THE KNIVES ON VINTAGE DELTA 8" JOINTERS - ALL NEW CNC MACH'D
$ 38.01
- Description
- Size Guide
Description
LOCK BARS FOR RETAINING THE KNIVES ONVINTAGE DELTA 8” JOINTERS
These are all new CNC machined carbon steel lock bars for Delta 8” jointers.
They are much improved reproduction copies of the original lock bars on the vintage Delta jointer model numbers 37-300A, 37-301, 37-315, and 37-321.
They may very well fit other jointer brand and models, but the fitment is the responsibility of the purchaser.
Each bar is computer machined from .25 x .50 C1018 steel and measures 7.93” long.
Each bar is tapped in five (5) places at the correct angle for the 1/4-28 fine thread lock screws.
The bars are sold in matched sets of three to complete the knife installation in one cutter head.
Our bars differ from the original Delta lock bars by the addition of a milled clearance cut at each screw hole. This clearance cut does not weaken the bar, but provides more clearance for the already tight opening for the open end wrench at each bolt.
Screws are shown in the photos
for reference only and are
not
included
with the purchase of these lock bars.
However, our 304 stainless steel replacement lock bar screws are available from another of our eBay listings.
Shipping to anywhere in the lower 48 States is .00.
Shipping to other locations will be calculated based on zip code and quoted before payment is accepted.
Payment by PayPal is preferred.