KO Lee BA860 Tool Cutter / Grinder + B885 Radial Grinding Fixture w/ 3-Jaw Chuck

Description

You are considering a KO Lee Model BA860 Tool Cutter / Grinder Machine with a B885 Radial Grinding Fixture Attachment and a B940 3-Jaw Chuck. This machine is used and we are rating it as "fair" condition, mainly due to its overall appearance. The previous owner had done a terrible paint job on it; covering all the scales for setting angles, length, etc., the oil level site holes, nameplates and so on. It had so much paint build up in spots that it was effecting the travel on certain parts. Luckily, it must of been a "paint over dirt" job and most of the built up paint peeled off pretty easy. We've scraped or wire brushed off everything of importance that we could think of and freed up the moving parts to a degree that the machine should be usable. It may still need some TLC to get everything moving smoothly. It looks as though the previous owner used it to grind one particular part and never adjusted the machine beyond that.
We have test run the machine here and it seems to run out fine. The motor and arbor sound good with no excess bearing noise.  We did notice that the handwheel that runs the table front to back has a good bit of "play" in it. It may be possible to adjust this out, but we are not sure how to do so. The other adjustment handwheels seem to be good with little to no play in them. There are several grinding wheels, backing plates and other items with the machine. There are extra pulleys for changing speed. There are 3 extra drive belts, but 2 of them may or may not be usable.  Also, we do not know the age or condition of the grinding wheels. Some of them may or may not be usable.  Some of the items may not have anything to do with this grinder or its accessories, but they were in the cabinet, so we are including them (see pictures).
Mfg. By: KO Lee  (made in USA)
Model BA860 Tool Cutter / Grinder
Serial No: 6373
Drive Motor: 1/2 HP
Voltage: 230V  3 Phase
Machine has a long spiral power cord on it, but there is no electrical disconnect with it. The Forward/ Off/ Reverse switch on top of the motor controls it, but you will need to supply your own fused disconnect for safety.
SHIPPING: Buyer to pay actual shipping cost, via motor freight, from Muscle Shoals, AL 35661. Or, you are more than welcome to pick the item up here. For shipping quotes please contact us with your zip code, address type (commercial or residential) and let us know if you have a way of unloading the item (forklift, loading dock, etc.) or if you will need lift-gate truck service.
PAYMENT: Paypal
If you have any other questions, please feel free to contact us. You may do so by using the "ask seller a question" link on this listing. Thanks for looking and Happy Bidding! Be sure to check out our other listings for more new and used surplus items.