7" Bevel Jig 180mm Adjustable Knife Making Belt Grinder Grinding Jig Aluminum

Description

The jig is made for knife making for grinding bevel angles on a knife blade and blank grinding.
Using the jig
relieves
strain from the hands and improves grinding precision.
The jig is manufactured by experienced bladesmithing equipment manufacturer.
All the parts are bolted together and exchangeable.
Aluminum prevents corrosion. The jig can be dipped in water.
Bottom is plated with fiberglass to reduce friction and protect from scratches.
Verified by experienced professional bladesmiths.
Specifications:
Rotating elements - swivel bearings.
Jig material - 2017 T8 Aluminum (heat treated), surface ground, 8 mm.
Size - 180 x 90 x 60 mm, 7 x 3.5 x 2.3 inch.
Weight - 1 kg, 2.2 pounds (w/o package).
Angles range -  -15 to +30 degrees. (Up to 30 degrees per side of the blade.)
Package contents
7"/180mm Bevel Jig - 1pcs
Protractor (basic angle measurement tool) - 1pcs (optional)
*The type and size of the protractor may vary from the photo depending on availability.
*It's advised to use a digital angle meter for increased precision.
Usage
Attach the blade blank to the jig with M5 screws with grinded edge facing up.
Set the desired angle using the set screw handle.
Grind moving side to side.
For cooling the blank the jig can be dipped in water, no need to remove the blank.
For final finishes of the blade this sharpener can be used:
https://www.ebay.com/itm/274368573634
Most reliable top quality product made for very long service life.