1940s GALLMEYER & LIVINGSTON Model F SURFACE GRINDER

Description

1940s GALLMEYER & LIVINGSTON Model F SURFACE GRINDER
Please wait for your shipping quote and invoice before sending payment.
Buyer is responsible for all rigging and shipping costs. We have riggers and shipping companies we can recommend. Payment is due within 2-3 days of order date via wire transfer, cashiers check or company check (in some cases). We have been on eBay since 2004 with over 2,300 ratings.
Under Power and Ready for Inspection
EZ Systems Machine Reference Number: ez32982
Machine Location: Cypress, TX 77429
Model                                                    F
Working surface of table                       24" x 96"
Automatic traverse of head                  24"
Vertical movement of wheel head        30"
Maximum distance under 20" wheel    25"
Wheel size                                            20" x 6" x 12" C/B
Spindle motor                                       30 hp, 1160 rpm
Hydraulic motor                                    20 hp, 1160 rpm
Coolant motor                                      1/4 hp, 1725 rpm
Vertical head motor                              3/4 hp, 1725 rpm
Neutrifier Model                                    2T1
Coolant separation tank                       Yes
Approximate weight                             28,000 lbs.
Comments: This is an older (mid - 40's) grinder which we purchased from a local grinding shop. Originally this company used this grinder to sharpen shear blades, but several years ago they purchased a knife grinder and two years ago purchased another grinding shop which had an even larger knife grinder, consequently this grinder became surplus and was not used.
We have reconditioned this grinder. Major items as follows: We found six weak spots in the magnetic chuck and it has been disassembled, cleaned and repaired. The spindle bearings have been replaced. The ways had some scoring which had been filled and flecked. The hydraulic cylinder which strokes the table has been
rebuilt and the tank and valve body cleaned and rebuilt. Finally, the machine has been cleaned, painted and cycled.
Questions?
Please use this Contact Seller Link here
We are part of eBay's beta program which allows you to call us with questions.
Use the Contact Seller link above to get to the Find Answers from EZSystems page to get our phone number.
Below explains what to do once you are on that page.
Warning:
Even though we are part of eBay's beta program, when you are using eBay's messaging system do not ask us for our phone number or give us your phone number since this is still against eBay's terms of service. Giving us your phone number via eBay's messaging system can get you / us suspended.