16" X 32" OKAMOTO SURFACE GRINDER, MODEL PSG-84, FULLY AUTOMATIC, COOLANT

Description

WISCONSIN METALWORKING MACHINERY
ID#10337
Specifications:
GENERAL SPECIFICATIONS:
MANUFACTURER........................... OKAMOTO
MODEL.................................. PSG-84
SERIAL NUMBER.......................... 8412
MAXIMUM GRINDING LENGTH................ 31.5"
MAXIMUM GRINDING WIDTH................. 16"
MAXIMUM HEIGHT 14" UNDER WHEEL......... 20.5"
MAXIMUM LONGITUDINAL MOVEMENT (MAN.)... 37.4"
(AUTO.).. 35"
MAXIMUM CROSS MOVEMENT (MAN.).......... 16.9"
(AUTO.)......... 16"
MAGNETIC CHUCK SIZE.................... 31.5" X 15.7"
FEEDS:
LONGITUDINAL FEED...................... 3 TO 83 FPM
MANUAL LONGITUDINAL FEED............... 2.47"
CROSS FEED:
HYDRAULIC INTERMITTENT............ 0.04" TO 0.275"
HYDRAULIC CONTINUOUS.............. .63" TO 3.3 FPM
HAND FEED PER REVOLUTION.......... 0.2"
GRADUATION OF WHEEL............... 0.001"
VERTICAL FEED OF WHEEL HEAD:
AUTO DOWN FEED (7 STEPS).......... 0.00015" - .0011"
HAND FEED PER REVOLUTION.......... 0.04"
GRADUATION OF HAND WHEEL.......... 0.0002"
RAPID FEED RATE................... 19 IPM
STANDARD GRINDING WHEEL SIZE...... 14" X 1-1/2" X 5"
SPINDLE WHEEL SPEED............... 1800 RPM
OVERALL DIMENSIONS APPROXIMATELY.. 74' X 103" X 73" H
WEIGHT APPROXIMATELY.............. 4,900 LBS.
EQUIPPED WITH:
WALKER VARIABLE CHUCK CONTROLS
AUTOMATIC DOWN FEED
HYDRAULIC POWER LONGITUDINAL AND CROSS FEEDS
POWER WHEEL HEAD ELEVATION
SPINDLE DRIVE MOTOR AND CONTROLS 5 HP
WIRED 3/60/230/460 VOLT
HYDRAULIC PUMP MOTOR 3 HP
VERTICAL RAPID FEED MOTOR 1/4 HP
COOLANT PUMP AND TANK WITH MAGNETIC SEPARATOR
PUSH BUTTON CONTROL STATION
AUTOMATIC LUBRICATION SYSTEM
TABLE SPLASH GUARDS
SPECIFICATION SUBJECT TO VERIFICATION
CONDITIONS OF SALE
TERMS
:
Cash or check with order, unless otherwise stated.
WARRANTY:
The goods described herein are pre-owned used goods and are offered "as is", "where is" unless otherwise noted herein, SELLER MAKES NO WARRANTIES OF ANY KIND WHATEVER, EXPRESSED OR IMPLIED, OR MERCHANT-ABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  All specifications and description of said goods are approximate only.  It is the Buyers responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods conform to Buyer's requirements.
MACHINE USE AND SAFETY:
Buyer acknowledges that the goods described herein are preowned used GOODS WHICH WERE NEITHER DESIGNED NOR MANUFACTURED BY THE seller, nor has the Seller knowledge of,  or control over the prior use or misuse of said goods, nor does the Seller have knowledge or control over the future application of these goods by the Buyer.  It is the Buyer's (user's) responsibility to provide proper safety devices, equipment and instructions for any particular use and to take all necessary steps to conform to all federal, state or local government safety standards including OSHA.
INDEMNIFICATION:
Buyer agrees to indemnify, hold harmless and defend Seller of and from any and all claims, liabilities and damages from any accidents or other incidents involving the goods described herein.